|
Micro Grind 21 is a 3-Axis Universal Front and Back End Grinding Machine of
Ferrules with Loading and Unloading Systems. The Machine is Equipped with Two
Linear Axis (X/Y) and One Rotational Axis (A) to do Total Length Adjustment,
Chamfering and Flat Angle Grinding.
Serial No. PA1093-181D-15 New - 2001
SPECIFICATIONS:
Part Diameter - Maximum 2-8 mm / .1102"
- Minimum 1.25mm / .0492"
Part Length - Maximum 16.5mm / .6496"
- Minimum 6mm / .2362"
Ferrule Spindle Speed 500 - 6000 RPM
Grinding Tool Speed - Maximum 60,000 RPM
- Minimum 5,000 RPM
Typical Cycle Time - One Operation Simple Chamfer 8 Seconds
- Two Operations 11 Seconds
Electrical 220 - 240 V / 50-60 Hz
Air Requirements 80 PSI
Approximate Dimensions 45"L x 40"W x 60"H
Approximate Weight 992 Lbs.
EQUIPPED WITH:
(2) Grinding Spindles for Rough & Finish Grinding
Automatic Loading/Unloading
Coolant Filtration System
Mist Collector
Post Process Measuring Device
Manuals
*Preliminary Specifications Subject to Verification.
RETURN
to complete inventory display
RETURN
to our home page