|
Serial No. 2824-437 New - 1978
Motor Driven with (2) 15 HP, 3 Phase, 60 Cycle, 440 Volt, A.C. Gear Driven
Spindle Heads with D.C. Injection Braking, Push Button Operators Control.
SPECIFICATIONS:
Diameter Work Held In Standard Vise - Maximum 6.5"
Diameter Work - Minimum .25"
Work Length - Maximum 111"
Work Length - Minimum (Held in Two Vises) 3"
Work Length - Minimum (Held in One Vise) .75"
Diameter Admitted - Maximum (Swing Over Bed) 21"
Diameter of Facing with Standard Cutters - Maximum 5.25"
Spindle Speed Range (Thru Change Gears) 81 to 1180 RPM
Feed Stroke Available with Standard Cams 1.5" to 2.5"
Standard Feed Rates Per Spindle Revolution (8) .001 - .018 IPR
Rapid Traverse Rate 250 IPM
Approximate Overall Dimensions 160"L-Rx52"F-Bx80"H
Approximate Weight 8,000 Lbs.
EQUIPPED WITH:
Fully Automatic Work Cycle Control
Automatic Trips
(2) Air Operated Vertical Vises
Motor Driven Coolant System.
Front and Rear Splash Guards
Large Quantity of Spindle Speed Change Gears
Spindles No. 40 National Standard Taper
Combination Facing and Centering Cutterbody for Long and Short Parts
Electrical Controls
*Preliminary Specifications Subject to Verification.
RETURN
to complete inventory display
RETURN
to our home page