|
Serial No. 0702.0500 New - 1996
SPECIFICATIONS:
X Travel 30"
Y Travel 16.9"
Z Travel 17.7"
Table Surface to Spindle Gage Plane 15" - 34"
Table Working Surface 39.4" x 20.4"
Table Load Capacity 1,100 Lbs.
Table Surface .71" T-Slots x 3
Table Surface to Floor Level 30"
Spindle Speed 45 -12000 RPM
Spindle Taper Taper No.40
Spindle Motor 10/7.3 HP (30 Min./Cont.)
Feed Motor 2.7 HP
Tool Change Arm Rotation Motor .67 HP
Tool Change Arm Insert/Extract Motor 1.3 HP
Hydraulic Pump Motor 3.0 HP
Number of Speeds Infinitely Variable
Diameter of Front Bearing 2.76"
Rapid Traverse Rate 1181 IPM
Rapid Feed Rate 945/Z, 787/X,Y IPM
Cutting Feed Rate .004 - 394 IPM
Tool Storage Capacity 32 ATC
Tool Changing Time Tool to Tool 1.5 Seconds
Tool Diameter with Adjacent Tool 3.74"
Tool Diameter without Adjacent Tool 5.98"
Tool Length - Maximum 11.81"
Tool Weight - Maximum 17.6 Lbs.
Approximate Dimensions 118"L x 108"W x 101"H
Approximate Weight 12,760 Lbs.
EQUIPPED WITH:
Okuma OSP7000M-H Control with Monitor: RS232 Port, 3.5" Floppy, Helical
Interpolation, Synchronized Tapping, Mac Man, Graphic, Animation, Exact Stop,
Angle 1/10000, Sub Programs, 80M Tape Storage, and IMAP.
Nikken Model 5AX-4MT-120 OSP CNC Rotary Table
Tilting Axis:
Table Diameter 9.8"
Rotation Speed - Maximum 8.3 RPM
Angle of Movement +110 Degrees to -110 Degrees
Braking Force 35 kgf.m
Setting Unit - Minimum 0.001 Degree
Total Reduction Ratio 1 : 120
Indexing Accuracy +/- 30 Sec.
Drive Motor Fanuc AC 0S
Detector 3000 PPR
Rotating Axis:
Table Diamiter 4.1"
Rotation Speed - Maximum 11.1 RPM
Angle of Movement 360 Degrees at Will
Braking Force 15 kgf.m
Setting Unit - Minimum 0.001 Degree
Total Reduction Ratio 1 : 180
Indexing Accuracy +/- 45 Sec.
Drive Motor Fanuc AC 5S
Detector 2000 PPR
Thru-Spindle Coolant
Coolant Pump and Tank
*Preliminary Specifications Subject to Verification.
RETURN
to complete inventory display
RETURN
to our home page