|
Serial No. 24947 New - 1986
SPECIFICATIONS:
Distance Between Tailstock 38"
Distance Between Workhead and Tailstock Centers 26"
Distance Between Workhead Collet and Tailstock 27"
Distance Between B946 Chuck Face and Tailstock 25-1/2"
Table Working Surface 5-1/4" X 37-1/4"
Sub-Table 8" X 48"
Crossfeed Movement - Maximum 7-1/4"
Feed Per Handwheel Revolution (Graduated .001") .100"
Table Traverse 20"
Fast Feed per Handwheel Revolution 2-13/16"
Slow Feed per Handwheel Revolution 9/16"
Fast:Slow - Ratio 5:1
Vertical Column Movement 7-1/2"
Feed per Handwheel Revolution (Graduated .001") .050"
Column Diameter 4"
Swing Over Table 8-1/4"
Centerline of Wheel Shaft to Table - Maximum 10-3/4"
Centerline of Wheel Shaft to Table - Minimum 3-3/4"
Column to Outside of Straight Wheel (Slide Not Ext.) 4-1/2"
Column to Outside of Straight Wheel (Slide Extended) 10-11/16"
Centerline Height of Fixtures to Top of Table 4.130"
Table T-Slot 7/16"
Table Swivel 225 Degrees
Wheel Head Swivel 360 Degrees
Motor Speed 3450 RPM
High Speed Spindle Speed Range 3450 - 18,400 RPM
I.D. Depth Capacity w/ Standard Arbors (Hole 9/32-2") 2-3/4"
Crossfeed Surface Grinding, 8" Wheel - Maximum 4-1/4"
Grinding Wheel Hole Size 1-1/4"
Approximate Weight 1500 Lbs.
EQUIPPED WITH:
B3043 Motorized Workhead Centerline Height of 4.130" and 6.130" w/ Bracket
B2043CR Power Controller for Variable Speeds
B1095FS Air-Collet Closure for 5MT Collet Fixtures
BA986 Radial Grinding Fixture
ACU-RITE "QwikCount" 2-Axis (in/mm) Digital Readout
B942 Sensitive Workhead w/ 4.130" Centerline Height and 11B&S & 5MT Taper
B943D Dead Center Assembly
B922 (Set) Tailstock Centerline Height 4.130"
B6022 (Set) Tailstock Centerline Height 6.130"
B641 Collet Fixture
B6040K Diamond Dresser
B939 Center Gauge
B827 Plain Tooth Rest
A609A T-Slot Arm
B6055B Spindle
S6055CS Spindle
S6055CL Spindle
*Preliminary Specifications Subject to Verification.
RETURN
to complete inventory display
RETURN
to our home page