Inventory

No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85   Our stock number: 35783

No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85

Click on picture below for larger version
No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85
No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85No. 340-20, Cincinnati,Twin Grip,Thru-Feed,Auto Comp/Truing,Heidenhain Scale,'85

Serial No. 350520H84-0019   
New - 1985

SPECIFICATIONS:

Grinding Diameter - Maximum...............................6"
Standard Thru Feed and Infeed Work Rest............1/2" - 3"
Grinding Wheel - Hole....................................12"
Grinding Wheel - Maximum Diameter........................24"
Grinding Wheel - Minimum Diameter........................17"
Grinding Wheel - Width.............................Up to 20"
Regulating Wheel - Hole...................................6"
Regulating Wheel - Maximum Diameter......................14"
Regulating Wheel - Minimum Diameter..................10-1/2"
Regulating Wheel - Width...........................Up to 20"
Regulating Wheel Speeds - Low Range..............12 - 56 RPM
Regulating Wheel Speeds - High Range............56 - 300 RPM
Grinding Wheel Drive....................................40HP
Regulating Wheel Drive..................................2 HP
Hydraulic Pump..........................................1 HP
Speed Changes..............Var. Pitch Sheaves and Gear Shift
Actual Dimensions........................170"L X 80"W X 95"H
Approximate Weight...............................18,900 Lbs.

Grinding Wheel Spindle:
Cartridge Type Spindle includes Filmatic Bearings which are Self Adjusting for
  variations in load.  Automatic Circulating Lubrication under pressure.

Regulating Wheel Spindle with Outboard Support:
Two Piece Bronze Bearing each side of Wheel, Plus Rear Support Bearing and 
  Anti-Friction Thrust Bearing on End.  Automatic Pressure Lubrication.

EQUIPPED WITH:
Edmunds Gages "Accu-Setter" Gaging System Model E-580900 w/ "Interchangeable"
 Signal Conditioning Modules (Currently Configured W/ 2 Channel Electronics
(1) Linear Variable Differential Transformer (LVDT) Normal-Acting Probe
AirTronics Inchworm Precision Two-Way Actuator System Min increment 0.00001"
Current Transformer (Load Meter)
Sub Panel (Load Meter)
Inchworm Compensator
Pushbutton Station (Inchworm)
Booster Assembly (Compensator)
Gage Fixture

Automatic Grinding Wheel Truing with Automatic Diamond Advance
Power Profile Regulating Wheel Truing
Heidenhain Digital Read-Out 3-Axis with Glass Scales (Resolution on upper

slide reads to 0.000000" lower slide reads to 0.00000" and base slide taper

adjust reads to 0.0000"
20" Thru Feed Work Rest
Trabon Auto Lubricating to Machine Slides, Truing Attachments and CAM Follower

*Preliminary Specifications Subject to Verification.


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page