Inventory

Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10" Main, 10" Sub, 3" Bar Cap., 2004   Our stock number: 37310

Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004

Click on picture below for larger version
Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004
Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004Mazak Integrex 300-3ST, Mazatrol 640MT Pro, 10 Main, 10 Sub, 3 Bar Cap., 2004

Serial No. 171975                                New - 2004
Cutting Hours - Approximately 5,000

SPECIFICATIONS:
Swing - Maximum..............................................33.5"
Swing using Y-Axis - Maximum...........................26" - 33.5"
Swing over Cross Slide - Maximum.............................33.5"
Swing over Lower Turret - Maximum.............................16.5
  Note: Without boring bar holder on turret.
Upper Chucking Cutting Diameter - Maximum......................30"
Lower Chucking Cutting Diameter - Maximum....................16.5"
Cutting Length - Maximum.......................................60"
Distance between Chuck Faces - Maximum.........................60"
Floor Space Required......................201"L x 91.8"W x 110.2"H
Approximate Weight.....................................29,983 Lbs.

Main Spindle (L):
Spindle Nose..................................................A2-8
Spindle Bore.................................................3.46"
Bar Work - Maximum...................................3.0" Diameter
Spindle Speed............................................4,000 RPM
Spindle Index (Programmable)...........................0.0001 Deg.
Spindle Horsepower (Continous/30 Minutes)............30/35 HP (AC)
Spindle Torque......................................442.5 Ft. Lbs.

Second Spindle (R):
Spindle Nose..................................................A2-8
Spindle Bore.................................................3.46"
Bar Work - Maximum...................................3.0" Diameter
Spindle Speed............................................4,000 RPM
Spindle Index (Programmable).........0.0001 Deg. (C-Axis Optional)
Spindle Horsepower (Continous/30 Minutes)............30/35 HP (AC)
Spindle Torque.......................................368.8 Ft-Lbs.

Upper Turret and Tooling:
Type of Turret....................................1 Position w/ATC
Tool Shank Height...............................................1"
Tool Size (Boring Bar Maximum Diameter).......................1.5"
Magazine Capacity....................................40 Tools (KM)
Tool Selction Method........................................Random
Tool to Tool ATC Time..................................1.3 Seconds
Tool Diameter w/All Pockets Full - Maximum...................3.54"
Tool Diameter w/Adjacent Pockets Empty - Maximum.............4.92"
Tool Length from Gage-Line - Maximum........................15.75"
Tool Weight - Maximum......................................22 Lbs.
Rotary Tool Spindle Speed...............................12,000 RPM
Rotary Tool Spindle Horsepower (20% ED)...............24.8 HP (AC)
Rotary Tool Torque (20% ED)...........................88.5 Ft-Lbs.

Lower Turret and Tooling:
Type of Turret................................................Drum
Tool Shank Height....................................1" x 1" x 5"L
Tool Size (Boring Bar Maximum Diameter)......................1.25"
Total Number of Tools............................................9
Tool Selection Method...............................Bi-Directional
Tool Index Time (1 Step)..............................0.14 Seconds

Axis Travels:
Y-Axis...................................................+/- 4.53"
X-Axis.......................................................24.8"
Z-Axis.......................................................62.4"
X2 Axis Lower................................................9.06"
Z2 Axis Lower................................................60.2"
Second Headstock W-Axis.....................................60.24"

Axis Rapid Rates:
Y-Axis....................................................1023 IPM
X/X2 Axis.................................................1496 IPM
Z/Z2 Axis.................................................1496 IPM
Second Headstock W-Axis...................................1181 IPM
C-Axis.....................................................400 RPM
B-Axis......................................................10 RPM

Dimensions:
Floor Space...................................201"(L-R) x 92"(F-B)
Height......................................................110.2"
Weight.................................................30,000 Lbs.

EQUIPPED WITH:
Mazatrol Fusion 640MT Pro CNC
Performance CNC Optional Package
RS-232C/3.5" Floppy Drive
PCMCIA I/F (2-Slot, Card BUS)
Network Interface (LAN & Modem)
Coolant Thru Milling Head
213 PSI Thru/Flood Coolant (Upper Turret)
1 KG Flood Coolant (Lower Turret) 14.2 PSI
C-Axis 0.0001 Degree Incr. (1st & 2nd Spindle)
40 KM63 Tool Magazine
B-Axis 0.0001 Degree Incr. N/A Contouring
B-Axis Index 5 Degree (Coupling Clamp)
Lower 9 Position Drum Turret
Chip Conveyor (Side, Consep) 1500U (60")
Automatic Tool Eye
Auto Chuck Jaws Open/Close (1st & 2nd Spindle)
Chuck Open/Close Confirm (1st & 2nd Spindle)
Chuck Air Blast (1st Spindle)
Mazak Supplied I/F for Ovation EZ Comp. Sys.
(40) Tool Holders

*Preliminary Specifications Subject to Verification.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page