Inventory

1" x 32" Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92   Our stock number: 39801

1 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92

Click on picture below for larger version
1 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,921 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,921 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92
1 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,921 x 32 Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92

Serial No. M-5298

New - 1992

CAPACITY:
Spindles - Number..............................................2
Capacity - Drilling............................0.156-1.00 inches
Stroke - Spindle (Z Axis)............................32.0 inches
Depth - Drilling with Whip Guide.....................16.0 inches
Spindle Motor - Standard....................................3 HP
Speeds - Spindle..................................800 - 7200 RPM
(By Mechanical Variable Speed Drive)
Feed - Spindle...................................0.1 - 20 I.P.M.
Area - Table......................................16 X 32 inches
Table Travel (X Axis)..................................13 inches
Table Travel (Y Axis)..................................12 inches
Table Load Capacity - Maximum..........................1100 Lbs.
Weight - Machine & Coolant System........9900 Lbs. Approximately
Floor Space Required for Installation............152 X 83 inches

SYSTEM DESCRIPTION:

FEED SYSTEM:
Equipped with FANUC OM-A control. Coupled to a precision ground ball screw.

CNC CONTROL - FANUC OM-A
Three Axis..............................................(X,Y,Z)
Two Simultaneously Controllable Axis....................(X & Y)
Decimal Point Programming
Increment System:........................................0.01mm
Tape Code:.........................................E1A RS-244-A
Programmable Dimensions - Maximum...........( + or - 6 Digits )
Rapid Traverse Rate............................X - 1000 mm/min.
                                               Y - 1000 mm/min.
                                               Z - 3000 mm/min.
Inch/Metric Conversion
Combined Use of Absolute/Incremental Programming In the Same Block of Tape.
Pulse Generator - Manual
Dwell: CRT Character Display
Single Block Operation
Optional Block Skip
External Mirror Image
Dry Run
Machine Lock
Emergency Stop
Sequence Number Search
Program Number Search
Feed Hold
Servo Motor: Fanuc DC Servo Motor
Feed Back: Pulse Encoder
Reference Point Return: Manual, Automatic   

External Deceleration
Manual Pulse Generator
Canned Cycle
Custom Macro

LUBRICATION:
Air/Oil Positive Lubrication of Sprindle Provided.

CONSTRUCTION:
Knee, base and table are designed and built from high quality cast iron,

stress relieved for stability. 
Way base is hardened and ground.

STANDARD EQUIPMENT:
Spindle Load Monitor
Magnetic Separator
Whip Guide
Overflow Preventing Device
Air/Oil Spindle Lubrication System
Pneumatic Power Bushing System
Automatic Slide Ways Lubrication System

Complete Operator Instruction and Maintenance Manuals

SPINDLE:
Equipped with a 9:1 Ratio Mechanical Variable Speed Drive.
Standard Spindle RPM's 800 - 7200 RPM

OPTIONAL EQUIPMENT:
Automatic Oil Receiver for Through Holes
RS232C Tape Interface Option

OPTIONAL SPECIFICATIONS:
Tool Length Compensation
Spindle Function: S2/S4 AC Spindle Motor Keep              

Tape Punch Interface: RS232C, FAC, T4070 or ASR 43/33

Inch/Metric Conversion Switchable by G Codes

Stored Stroke Limit
Part Program Storage and Editing: 40/80/320 mm

ISO Code Input: ISO 840 (Automatic Recognition of E1A/150)

*Preliminary Specifications Subject to Verification.







Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page