Inventory

3.0" Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,   Our stock number: 41980

3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,

Click on picture below for larger version
3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,
3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,3.0 Spartan (Marvel) P-65A,Fully Automatic,Load Tbl.Ball Screw Feed,PLC 2006,

Serial No. P65A-102
New - 2006

Ferrous Automatic Circular Cold Saw offers the best combination of high
performance and premium surface finish. The machine utilizes a floating feed
carriage, driven on a ball screw, to accurately position the piece to be cut.
After the saw cut is made, the machine separates the blade from the material,
for a "contact free" return stroke, eliminating chatter marks on the cut
surface. The machine comes with a PLC control for cut lengths and quantities.

SPECIFICATIONS:
Saw Blade Diameter..............................................11.8" Diameter
Cutting Capacities: Round - Maximum.........................................3"
Cutting Capacities: Round - Minimum.......................................0.5"
Cutting Capacities: Square - Maximum......................................2.6"
cutting Capacities: Square - Minimum......................................0.5"
Blade Speed.......................................................30 - 150 RPM
Cutting Feed.........................................................Hydraulic
Loading Magazine....................................................204" X 47"
Automatic Feed Length - Single Feed...............................0.3" - 23.6"
Automatic Feed Length - Multiple Feed............................23.6" - 70.8"
Trim Cut Length..................................................0.59" to 1.5"
Remnant Material Length...................................................3.1"
Blade Drive Motor (Variable Speed AC w/Invertor).........................10 HP
Hydraulic Pump Motor......................................................2 HP
Hydraulic Tank Capacity.............................................29 Gallons
Coolant Tank Capacity.................................................1 Gallon
Present Electrical Configuration.......................460 V / 3 Phase / 60 Hz
Actual Dimensions - Machine.................................81"L X 81"W X 91"H
Actual Dimensions - Load Table.............................218"L x 57"W x 66"H
Approximate Weight..................................................2,300 Lbs.

EQUIPPED WITH:
Siemens Model S5 Programmable Logic Controller (PLC).
Horizontal and Vertical Clamping Vices.
Hydraulic Motor and Ball Screw Provides Stable Blade Feeding.
Digital Display Feedback.
Contact Free Return Stroke (Automatic Enlargement of Cutting Gap).
Ishan YSM-C Spray Mist System.
Oil Bath Lubrication for Saw Blade Transmission.
Air-Cooled Disk Brake to Eliminate Vibration and Minimize Gearbox Backlash.
Full Sound Enclosure Cabin around Complete Machine.
Automatic Feeding System with Floating Vice.
AC Servo Driven Shuttle Vise Feed Motor.
Floating Vice Equipped with Two Out-of-Work Sensors.
Automatic Loading Table Capacity: Circular Rod 3" Dia. x 236.2"(Length) x 10.
Shuttle Table with Automatic Loading for Operator free Operation.
Automatic Hydraulic Controlled Discharge Chute with Part/Remnant Separation.
Automatic Chain and Slat Type Chip Conveyor.
Mist Collector.

*Preliminary Specifications Subject to Verification.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page