Inventory

Makino SP43,Travels X-17.72, Y-11.81", Z-12.59", U/V Axis, Wire Wizard CNC, 2004   Our stock number: 42654

Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004

Click on picture below for larger version
Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004
Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004Makino SP43,Travels X-17.72, Y-11.81 , Z-12.59 , U/V Axis, Wire Wizard CNC, 2004

Serial No. W7176
New - 2004

SPECIFICATIONS:
X-Axis...........................................................450mm (17.72)
Y-Axis Travel...................................................300mm (11.81")
Z-Axis Travel...................................................320mm (12.59")
U/V-Axis Travel...............................................+/-101mm (3.98")
Wire Guide......................................................V-Flat Diamond
Wire Electrode Diameter...................................0.2mm, 0.25mm, 0.3mm
Wire Feedrate....................................................0, 50-360mm/s
Wire Tension...............................................2-20N (.02-2.0 kgf)
Wire Reel Weight................................................20Kg (44 Lbs.)
Rapid Traverse Rate - X,Y,Z-Axis...................................2000mm/min.
Rapid Traverse Rate - U,V-Axis.....................................1000mm/min.
Servo Feed Rate...............................................0.01 - 50mm/min.
Jog Feed Rate..............................................50, 150, 600mm/min.
Automatic Wire Threading Unit........................................Water Jet
Prepared Hole Diameter - Minimum...................1.4mm/100mm Plate Thickness
Prepared Hole Diameter - Minimum....................0.5mm/30mm Plate Thickness
Prepared Hole Diameter - Minimum............0.20mm, No Slit,Both Nozzle Closed
Threading Time..................................15 Sec. / 30mm Plate Thickness
Threading Time...................................Retry 3, 0.20mm, No Angle Cut
Taper Angle (Mechanical) - Maximum.........+/-35 Degrees 100mm Plate Thickness
Position Accuracy..................................................+/- 0.015mm
Repeatability......................................................+/- 0.015mm
Table Size.......................................................28.7" x 22.8"
Table Surface Geometry..................................(80) M8 & (38) M6 Taps
Load Capacity - Maximum.....................................800kg (1,763 Lbs.)
Floor to Table Surface Distance..................................970mm (38.2")
Workpiece Size - Maximum.................................28.7" X 22.8" X 11.8"
Work Tank Size...............................35" x 33.5" x 15.9" (113 Gallons)
Dielectric Supply Tank.............................................220 Gallons
Clean Tank..........................................................30 Gallons
Dirty Tank.........................................................190 Gallons
Axis Feed Motors - X,Y-Axis..............................................0.5kw
Axis Feed Motors - U,V,Z-Axis............................................0.4kw
Flushing Pump Motors.................................................(2) 3.0kw
Filter Pump Motor.......................................................0.55kw
Tank Filling Pump Motor..................................................1.6kw
Circulation Pump Motor..................................................0.37kw
Dielectric Cooler Compressor.............................................1.7kw
Machining Current - Maximum................................................55A
Actual Machine Dimensions..................................115"L X 67"W X 92"H
Actual Coolant Dimensions...................................80"L X 36"W X 64"H
Machine Weight with Supply Tank.....................................6,900 LBS.

EQUIPPED WITH:
MGW-S 15" Touch Screen Interface
Programmable Auto-Threading, 15-Second Thread Time
Two-Piece "V" Type Wire Guide                                               

WireWIZARD CNC Control System with EZ-Cut, WireWIZARD allows for up to 30

percent faster processing speeds over other technologies. 
Lower consumable and maintenance costs and lower wire feedrates dramatically

reduce wire consumption without effecting machine accuracy or performance.
Filtering System, Inside-Out Type Paper Filters X4pcs.
Automatic Power Failure Recovery

*Preliminary Specifications Subject to Verification.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page