|
Serial No. 613864 New - 2000
SPECIFICATIONS:
TABLE SLIDE -
Distance Between Centers 39-3/8"
Travel - Maximum 51-3/16"
Traverse per Revolution of Handwheel (Coarse/Fine) 0.8" / 0.1"
Traverse per Division of Dial 0.002"
Traverse Speed - Hydraulic - Infinitely Variable 0.02 - 6 ft/min
Table Oscillation - Minimum 2.5"
Dwell Time on Table - Slide Reversal Inf. Var. 0 - 5 sec.
Swivel Range 9 Degrees
WHEELSLIDE -
Travel with Hand Wheel (Coarse/Fine) 8-21/32"
Infeed per Revolution of Hand Wheel (Coarse/Fine) 8" / 1" Dia.
Division of Dial 0.0002" Dia.
Division of Micro-Correction 0.00004" Dia.
Rapid Advance and Retraction - Hydraulic 1-9/16"
Hydraulic Infeed 0 - 0.037" Dia.
Plunge Grinding Infeed Speed 0.00001 - 0.0001" per sec.
Traverse Grinding Infeed per Table Slide Reversal 0.00004 - 1.18" Dia.
WHEELHEAD -
The Universal Wheelhead U Has Been Designed For OD, Face and ID Grinding in a
Single Set-Up. Maunal Swivel On Air Cushion.
Grinding Wheel for OD Grinding 16" x 2" x 5"
Grinding Wheel for Face Grinding 12" x 1-1/2" x 5"
Wheelhead Motor 5 HP
Spindle Speeds 1500/1700/2200 RPM
Wheelhead Swivel Range +5 / -195 Degrees
Indexed Stop Position Every 90 Degrees
Carrier Bore for Internal Grinding Spindles 3-5/32"
WORKHEAD - (Siemens A.C. Servo Drive)
Swivel Range +120 / -30 Degrees
Spindle Speeds - Infinitely Variable 6 - 600 RPM
Working Capacity Between Centers - Maximum 330 Lbs
Internal Taper of Work Spindle #5 MORSE
Workhead Motor 4 HP
TAILSTOCK - (Micro-Correction Option)
Internal Taper of Sleeve #4 MORSE
Sleeve Stroke 1-3/16"
Electrics 460V / 3PH / 60Hz
Approximate Floor Space Required 106"L x 64"W x 66"H
Approximate Weight 6500 Lbs.
EQUIPPED WITH:
Fortuna Internal Grinding Spindle (17,000 RPM) Model FIV 80R250.44, 3-5/32"
Bore, Belt Driven with Guard
Heidenhain DRO for In-Feed of Cross Slide and/or Table Slide Movement
Heidenhain LS 403C Scales
System Precision +/- 0.005 mm/m. Indication Switchable for Diameter or Radii
Micro-Correction for Tailstock for High Precision Corrections of Cylindricity
or Taper on Workpiece - Range +/- 0.006"
Sine Bar Attachment
12", Size 300 Radial Pole Division Type Permanent Magnetic Chuck
Radii Dressing Device
Lateral and Angular Dressing Device
Arboga-Darenth 1020 Paperband Coolant / Clarifier Unit
*Preliminary Specifications Subject to Verification.