Inventory

Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6" Ck, Rigid Tap, Fanuc 21I-TB,'05   Our stock number: 46042

Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05

Click on picture below for larger version
Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05
Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05Wasino G07-F, 2-Axis, Gang Tool, Gantry Load, 6 Ck, Rigid Tap, Fanuc 21I-TB,'05

Serial No. 3253
New - 2005

SPECIFICATIONS:
Swing Diameter - Maximum.............................................11-7/32"
Nominal Workpiece.....................................3-15/16" D x 3-15/16" L
Chuck Size - Maximum.......................................................6"
Spindle Nose.............................................................A2-6
Spindle Bore.............................................................2.5"
Spindle Speed - Maximum.............................................4,000 RPM
Spindle Motor (Duty Rated)...............................................10HP
Spindle Center Height.....................................................39"
X-Axis Travels - Cross Slide Travel....................................18.89"
Z-Axis Travels - Carriage Travel.......................................11.22"
Rapid Traverse Rates - X..............................................470 IPM
Rapid Traverse Rates - Z..............................................787 IPM
Power Requirements...........................................208/60/3: 18 KVA
Floor Space Requirement.............................................94" x 72"
Approximate Dimensions.................................55" L x 68" W x 100" H
Approximate Weight.................................................4,478 Lbs.

GANTRY LOADER SPECIFICATIONS:
Nominal Workpiece Size.....................................3.75"OD & 4.75" ID
Nominal Workpiece Weight.........................................3.3 Lbs. x2.

EQUIPPED WITH:
Fanuc 21I-TB CNC Control
(4) Spare M-Codes
0.00001 Offsetting
Spindle Orientation
Rigid Tapping
2-Jaw Chuck
(2) Boring Blocks
(2) Turn & Face Plate Blocks

*Preliminary Specifications Subject to Verification.





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page