Inventory

HLV-H-EM,Hardinge,11" x 18" In/mm Thrdng & Dials,5C Collets,Compound Cross Slide   Our stock number: 46451

HLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross Slide

Click on picture below for larger version
HLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross Slide
HLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross SlideHLV-H-EM,Hardinge,11 x 18 In/mm Thrdng & Dials,5C Collets,Compound Cross Slide

Serial No. HLV-H-9747-1
New - 1982

Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with
direct reading spindle speed indicator and controls. Hardinge Super-Precision
ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment.
Built-in coolant system. Hardened and ground dovetail bed. Leadscrew
threading with automatic stop. Independent electric variable power feed drive
for carriage and cross slide. Quick change gear box.

SPECIFICATIONS:
Spindle Capacity 5C Collets - Round...................................1-1/16"
Spindle Capacity 5C Collets - Hex........................................7/8"
Step Chucks......................................................1-1/16" - 6"
Variable Spindle Speeds........................................125 - 3000 RPM
Swing Over Bed............................................................11"
Swing Over Cross Slide.....................................................6"
Swing Over Carriage........................................................9"
Distance Between Centers..................................................18"
Hole thru Spindle......................................................1-1/4"
Compound Slide Travel......................................................3"
Carriage Power Feed Range.......................................5/16" - 7 IPM
Cross Slide Power Feed Range....................................3/16" - 4 IPM
Tailstock Spindle Travel...............................................3-3/4"
Tailstock Spindle Taper..............................................No. 2 MT
Lead Screw Diameter............................................1" - 8" Thread
Range of Threads (27) - Inch...................................11" - 108" TPI
Range of Threads (27) - Metric.................................0.275 - 2.7 mm
Electrics.......................................................230V/3Ph/60Hz
Dimensions - Approximate...................................65"L x 28"W x 58"H
Weight - Approximate...............................................1,700 Lbs.

EQUIPPED WITH:
Auxiliary Inch and Metric Threading Box
Dual Dials for Reading in Inch or Millimeter
Assorted Collets, Cut-Off Slide, Tool Posts
M.D. Coolant
Chip Guards

*Preliminary Specifications Subject to Verification.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page