Inventory

1-1/2" x 1-1/2" x 1/4", Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 2000   Our stock number: 48675

1-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 2000

Click on picture below for larger version
1-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 20001-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 20001-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 2000
1-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 20001-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 20001-1/2 x 1-1/2 x 1/4 , Simasv CH1340, Hyd, Horz/Vert, Leg In/Out, Tooling, 2000

New - 2000
Serial No. 3011066PH

SPECIFICATIONS:
Shaft Diameters......................................................1-3/8"
Roll Diameters.......................................................5-1/2"
Hydraulic Tank Capacity............................................1/2 Gal.
Power..................................................................2 HP
Electrics.....................................................480V/3Ph/60Hz
Position Repeat Readout..............................................Analog
Dimensions - Actual............................23"(L-R) x 38"(F-B) x 43"(H)
Bar Capacities (Mild Steel):
- Flat on Edge...............................................1-1/2" x 5/16"
- Flat on Flat....................................................2" x 1/2"
- Square...............................................................3/4"
- Round................................................................7/8"
Tube Capacities (Mild Steel):
- Rectangular.................................................1-1/4" x 5/8"
- Square...................................................1" x 0.109" Wall
- Round.....................................................1-5/8" x 16 ga.
Angle Iron Capacities (Mild Steel):
- Leg In......................................................1-1/2" x 1/4"
- Leg Out.....................................................1-1/2" x 1/4"
Channel Capacity - Mild Steel.................................1-5/8" x 3/4"
Pipe Capacity - Mild Steel.....................................3/4" Sch. 40

EQUIPPED WITH:
Horizontal or Vertical Roll Position
Leg In/Leg Out Bending
Foot Pedal Activation
Standard Guide Rolls
Independently Adjustable Upper Stops of Bending Roll Cylinders
Operator Manual
Electric & Hydraulic Schematics
Tooling

*Preliminary Specifications Subject to Verification



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page