Inventory

30"X, 30"Y, 30"Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'11   Our stock number: 48891

30 X, 30 Y, 30 Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'11

Click on picture below for larger version
30 X, 30 Y, 30 Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'1130 X, 30 Y, 30 Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'1130 X, 30 Y, 30 Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'1130 X, 30 Y, 30 Z, Okuma MB-5000H, 110 ATC, 40 HP, 40 Tpr, 15K RPM, OSP-P200M,'11

New - 2012

SPECIFICATIONS:
X-Axis (Column Right/Left)..............................................29.92"
Y-Axis (Spindel Up/Down)................................................29.92"
Z-Axis (Table Front/Back)...............................................29.92"
Spindle Center to Table Surface................................1.97" to 31.89"
Spindle End to Table Center....................................5.31" to 35.24"
Table (Pallet) Size.............................................19.69" x 19.69
Load Capacity - Maximum.............................................1,000 Lbs.
Optional Index Positions...............................................360,000
Spindle Speed - Maximum.............................................15,000 RPM
Rapid Feedrate(X-/Y-/Z-xis).......................................2,362.20 ipm
Jog Feedrates (X-/Y-/Z-Axis)..............................0.04 to 2,362.20 ipm
Tool Magazine Capacity.....................................................110
Taper...................................................................Cat 40
Tool Diameter - Maximum..................................................2.76"
Without Adjacent Tools...................................................5.91"
Tool Length - Maximum...................................................11.81"
Tool Weight - Maximum..................................................22 Lbs.
No. of Pallets...............................................................2
Spindle Drive [Standard (Wide Range)]............................34.7/24.67 HP
X-Axis Feed............................................................6.13 HP
Y-Axis Feed............................................................6.13 HP
Z-Axis Feed............................................................6.13 HP
Hydraulic Power Unit......................................................3 HP
Table Indexing.........................................................4.00 HP
Power Requirements.............................................kVA 45 (15,000)
Voltage.......................................................200V VAC +/- 10%
Frequency.............................................................50/60 Hz
Machine Height.........................................................113.35"
Floor Space..................................................102.56" x 181.50"
Machine Weight.....................................................27,500 Lbs.

EQUIPPED WITH:
Okuma OSP P200M CNC Controller
MP Systems, Hi-Pressure Coolant (Thru-Spdl)
Chip Conveyor
Tool Breakage Detection

*Preliminary Specifications Subject to Verification











Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page