Inventory

8" x 20", Shigiya GP-20/50A, 16"OD x 2"W x 5"ID Whl, Hydraulic Auto Cycles, 1996   Our stock number: 49208

8 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 1996

Click on picture below for larger version
8 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 19968 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 19968 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 19968 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 1996
8 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 19968 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 19968 x 20 , Shigiya GP-20/50A, 16 OD x 2 W x 5 ID Whl, Hydraulic Auto Cycles, 1996

New - 1996
Serial No. 060185

SPECIFICATIONS:
Swing Over Table......................................................7.87"
Distance between Centers.............................................19.69"
Table Stroke - Maximum................................................11.9"
Grinding Diameter - Maximum...........................................7.87"
Load between Centers - Maximum......................................44 Lbs.
Grinding Wheel Diameter.............................12.5" Min. - 15.9" Max.
Wheel Width - Maximum.................................................1.96"
Grinding Wheel Bore......................................................5"
Peripheral Grinding Wheel Speed.....................................108 FPS
Grinding Wheel Spindle Motor............................................5HP
Wheelhead Feed.........................................................6.4"
Wheelhead Rapid Traverse Distance......................................1.8"
Auto Infeed Total Movement..........................................0.03937
Plunge Cut Auto Infeed Speed............................0.00015 - .118 Min.
Plunge Cut Spark Out Range (Sec).................................0 - 99 Sec
Traverse Cut Auto Infeed Amount...........................0.000078 - 0.0078
Headstock (Rotating & Dead)
Headstock Swivel...................................................120 Deg.
Headstock Speed - Variable.....................................77 - 650 RPM
Center Taper.......................................................MT No. 3
Tailstock Spindle Stroke Distance.....................................0.78"

EQUIPPED WITH:
Hydraulic Automatic Wheel Infeed
Hydraulic Rapid Wheel Infeed
Hydraulic Automatic Table Traverse
Infeed timer (workhead) In Traverse Cut Auto-Grinding
Infeed timer (footstock) In Traverse Cut Auto-Grinding
Spark-Out Timer, Spark-Out Counter
Table Dwell (Tarry)
Angular Table Setting Vernier with Mitutoyo Gauge
Grinding Wheel Spindle Lubrication Unit
(3) Steady Rests
(1) Table Mount Single Point Dresser
Hydraulic Pump & Tank
Coolant System with Magnetic Separator and Oil Skimmer
Mist Collector with Hood
Books, Manuals & Drawings

*Preliminary Specifications Subject to Verification



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page