Inventory

No. VECTOR 200, EXTRUDE HONE, 2008,   Our stock number: 49182

No. VECTOR 200, EXTRUDE HONE, 2008,

Click on picture below for larger version
No. VECTOR 200, EXTRUDE HONE, 2008,

Serial No. R08-1508
New - 2008

SPECIFICATIONS:
Media Cylinder Diameter....................................................8"
Media Cylinder Capacity.........................................628.3 Cu. In.
Media Stroke Length.....................................................12.5"
Hydraulic Cylinder Diameter................................................6"
Clamping Cylinders Stroke.................................................20"
Hydraulic Clamping Force.............................................29.4 Ton
Opening Between Tooling Plates - Maximum..................................22"
Worktable Height..........................................................41"
Distance Between Columns..................................................36"
Compressed Air Required................................................58 PSI
Media Extrusion Pressure (Minimum - Maximum)...................200 - 1400 PSI
Media Delivery Rate (8.8 GPM).........................0 - 2,053 Cu.In./Minute
Expansion Diameter - Maximum.............................................8.7"
Hydraulic Power Unit...............................10 HP, 208/460, 3/60 Cycle
Pump Capacity @ 1750 RPM................................................5 GPM
Pressure.......................................................350 - 1500 PSI
Approximate Overall Dimensions - Closed................42" L x 52" W x 104" H
Approximate Weight.................................................5,000 Lbs.

EQUIPPED WITH:
Allen-Bradley Micrologix 1200 Analog Input Module (Programmable Controller)
Magelis Operator Interface Terminal with Touch Screen Control
Banner Opto-Touch Anti-Tie Down Safety Device
HP (High Pressure Option)
HPU (Air Heat Exchanger Option)
Standard functions include Remote Media Pressure Adjustment, Real Time Display
  of Media Piston Position, Automatic and Manual Mode, A Displacement Counter,
  a Cycle Counter and a Cycle Timer.
Machine Process Parameters are preset via the Operator Interface Terminal and
  can also be monitored on the Terminal once the Automatic Cycle has been
  initiated.
Books, Manuals, Drawings and Ladder Logic

*Preliminary Specifications Subject to Verification.



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page