Inventory

1/2"x18" Technidrill,4-Spdl.Knee Type,3-Axis CNC,Heidenhain Ctrl.,Clnt.Chillr'15 Our stock number: 46591

1/2 x18 Technidrill,4-Spdl.Knee Type,3-Axis CNC,Heidenhain Ctrl.,Clnt.Chillr'15

Click on picture below for larger version


Specifications:

Travels:
- X-Axis Table Travel....................................................12"
- Y-Axis Knee Vertical Travel............................................12"
- Z-Axis Drill Stroke..........................18" w/ 2 Whip Guide Installed
- Chip Box Pneumatic Flying Bushing Stroke............................0.750"
X-Axis Work Table:
- Dimensions.....................................................50"W x 18"L
- T-Slots......................................................0.560 x 0.950
- Capacity........................................................3,000 Lbs.
Feeds:
- X.........................................0.5" - 24" Per Minute Plus Rapid
- Y.........................................0.5" - 24" Per Minute Plus Rapid
- Z.........................................0.5" - 24" Per Minute Plus Rapid
Spindle:
- Number....................................................................4
- Drill Diameter - Maximum.............................................0.500"
- Bore................................................1.00" Dia. x 2.750 Deep
- (4) Horse Power........................................................3 HP
- RPM Range.....................................Variable from 3,000 to 12,000
Lubrication:
- Spindle.................................................Permanently Greased
- Ballscrews....................................................Manual Grease
- Ways..........................................................Manual Grease
- Model.............................................................30-400-40
- Tank Capacity...................................................400 Gallons
- (2)High Pressure Pump................................................20 GPM
- Pressure - Maximum................................................1,000 PSI
- (2)Pump Motor......................................................15 HP AC
- Filtration................Two 10 & Two 5 micron Disposable Bag Type Filters
- Recirculation Pump.........................................3 HP Centrifugal
- Heat Exchanger................................Water/Oil or Air/Oil-Standard
Electrical:
- CNC Control......................................................Heidenhain
- Power Requirements............................................460V-3PH-60HZ

*Preliminary Specifications Subject to Verification.

RETURN to our home page

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax: