Inventory

17.7" x 118", Shigiya GP-45B/300A, 24" x 3" Wide Wheel,Auto-cycles,Steadies,'05   Our stock number: 49206

17.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'05

Click on picture below for larger version
17.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'05
17.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'0517.7 x 118 , Shigiya GP-45B/300A, 24 x 3 Wide Wheel,Auto-cycles,Steadies,'05

New - 2005
Serial No. 10-10357

SPECIFICATIONS:
Capacity:
- Swing Over Table....................................................17.7"
- Center Distance....................................................118.1"
- Grinding Diameter - Maximum.........................................16.9"
- Workpiece Weight - Maximum.....................................2,200 Lbs.
Grind Wheel:
- Wheel OD......................................................17.3" - 24"
- Wheel ID..............................................................10"
- Wheel Width............................................................3"
Wheelhead:
- Spindle Speed.....................................................960 RPM
- Spindle Motor....................................................14.75 HP
- Manual Feed Stroke...................................................8.7"
- Rapid Feed Stroke....................................................2.4"
- Wheel Position Adjustment............................................6.5"
- Handwheel Feed - One Revolution.....................................0.04"
- Handwheel Feed - One Division...................................0.000098"
Automatic Infeed:
- Travel..............................................................0.03"
- Plunge-Cut Speed........................................0.0008 - 0.06 IPM
- Plunge-Cut Spark-Out Adjustment Range.........................0 - 30 Sec.
- Automatic Traverse-Cut Rate...............................0.00004 - 0.004
- Traverse-Cut Spark-Out Adjustment Range.......................0 - 99 Sec.
Workhead:
- Non-Swiveling Type - Dead Spindle........................................
- Spindle Speeds (8)...........................................13 - 200 RPM
- Center Taper.....................................................MT No. 5
- Center Height from Floor............................................45.3"
Footstock:
- Spindle Stroke.........................................................2"
- Center Taper.....................................................MT No. 5
Table:
- CCW Swivel Angle...................................................5 Deg.
- CW Swivel Angle...................................................30 Deg.
- Handwheel Feed - One Revolution (Two Speeds)..................0.1" - 0.6"
- Automatic Traverse Speed......................................2 - 118 IPM
Machine Weight - from Manual....................................20,900 Lbs.

EQUIPPED WITH:
Hydraulic Automatic Wheel Infeed
Hydraulic Rapid Wheel Infeed
Hydraulic Automatic Table Traverse
Infeed timer (workhead) In Traverse Cut Auto-Grinding
Infeed timer (footstock) In Traverse Cut Auto-Grinding
Spark-Out Timer, Spark-Out Counter
Table Dwell (Tarry)
SONY Model LH51 Digital Read-out (X-Axis In-Feed)
Angular Table Setting Vernier with Mitutoyo Gauge
Grinding Wheel Spindle Lubrication Unit
(6) Single Point Steady Rests
(1) Table Mount Wheel Dresser
Hydraulic Pump & Tank
Coolant System with Magnetic Separator and Oil Skimmer
Mist Collector with Hood
(20) OEM Mounting Pads
Books, Manuals, & Drawings

*Preliminary Specifications Subject to Verification



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

      RETURN to our home page